Non-restricting swivel elbow, M 12x1.5, tube 8 L, zinc-plated steel, no nut or ring

Once installed, the swivel elbow coupling takes a precision tube through a cutting ring to a metric male stud thread and still swivels freely in its plane. In addition the sheet lists a temperature range of -40 to +120 °C. This version comes with male stud thread M 12x1.5 and tube connection 8 L (M14x1.5). The version is listed with light series and scope of delivery without nut and cutting ring.

Benefits

• The elbow swivels freely until the union nut is tightened, so tube 8 L (M14x1,5) can be laid without stress.
• Non-restricting bore, the cross section of 8 L (M14x1,5) is kept right through the swivel bend.
• Male stud thread M 12x1.5 for a direct connection to a pump, valve or cylinder.
• Working pressure up to 315 bar in the light series.
• Temperature range -40 to +120 °C for the body in zinc-plated steel.

Applications

Where space at the device is tight, tube 8 L (M14x1,5) is guided past the wall through the swivel bend of the light series.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.