Non-restricting swivel elbow, M 33x2, tube 25 S, stainless steel 1.4571, no nut or ring

As a swivel elbow coupling the article takes a precision tube through a cutting ring to a metric male stud thread and still swivels freely in its plane. The data state a working pressure of 250 bar. Material stainless steel 1.4571 is listed for this version. Also stated are heavy series and scope of delivery without nut and cutting ring.

Benefits

• The elbow swivels freely until the union nut is tightened, so tube 25 S (M36x2) can be laid without stress.
• Non-restricting bore, the cross section of 25 S (M36x2) is kept right through the swivel bend.
• Male stud thread M 33x2 for a direct connection to a pump, valve or cylinder.
• Working pressure up to 250 bar in the heavy series.
• Temperature range -60 to +400 °C for the body in stainless steel 1.4571.

Applications

Where space at the device is tight, tube 25 S (M36x2) is guided past the wall through the swivel bend of the heavy series.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.