Male stud tee, R 3/8", tube 12 S, zinc-plated steel, no nut or ring

As a male stud tee the article connects a precision tube through a cutting ring to a pipe thread and branches off a third path. The data sheet gives a working pressure of 630 bar. The stated figures are male stud thread R 3/8" and tube connection 12 S (M20x1.5). Also stated are heavy series and scope of delivery without nut and cutting ring.

Benefits

• Male stud thread R 3/8" for a direct connection to a pump, valve or manifold.
• The third path of the tee saves an additional port on the device.
• Tube connection 12 S (M20x1,5) through a cutting ring in the heavy series.
• Working pressure up to 630 bar.
• Temperature range -40 to +120 °C for the version in zinc-plated steel.

Applications

At a manifold with an R 3/8" thread the tee takes tube 12 S (M20x1,5) and leads a second circuit away at the same time.

Standards and conformity

The stated temperature range -40 to +120 °C applies to the version in zinc-plated steel. An elastomer seal narrows it.