Male stud tee, G 1-1/2", tube 38 S, zinc-plated steel, heavy series

Once installed, the male stud tee connects a precision tube through a cutting ring to a pipe thread and branches off a third path. It is supplied with male stud thread G 1-1/2" and tube connection 38 S (M52x2). It is produced from zinc-plated steel. In addition the data give heavy series.

Benefits

• Male stud thread G 1-1/2" for a direct connection to a pump, valve or manifold.
• The third path of the tee saves an additional port on the device.
• Tube connection 38 S (M52x2) through a cutting ring in the heavy series.
• Working pressure up to 315 bar.
• Temperature range -40 to +120 °C for the version in zinc-plated steel.

Applications

For a measuring point on a line of the heavy series the second threaded port that would otherwise be needed is not required.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.