Male stud tee, R 1/4", tube 6 S, stainless steel 1.4571, heavy series

Once installed, the male stud tee connects a precision tube through a cutting ring to a pipe thread and branches off a third path. Material stainless steel 1.4571 is listed for this version. The data state a working pressure of 630 bar. Also stated are heavy series.

Benefits

• Male stud thread R 1/4" for a direct connection to a pump, valve or manifold.
• The third path of the tee saves an additional port on the device.
• Tube connection 6 S (M14x1,5) through a cutting ring in the heavy series.
• Working pressure up to 630 bar.
• Temperature range -60 to +400 °C for the version in stainless steel 1.4571.

Applications

For a measuring point on a line of the heavy series the second threaded port that would otherwise be needed is not required.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.