Male stud tee, R 1/8", tube 8 LL, zinc-plated steel, very light series

This male stud tee connects a precision tube through a cutting ring to a pipe thread and branches off a third path. The data sheet gives a working pressure of 100 bar. The stated figures are male stud thread R 1/8" and tube connection 8 LL (M12x1). This version is supplied with very light series.

Benefits

• Male stud thread R 1/8" for a direct connection to a pump, valve or manifold.
• The third path of the tee saves an additional port on the device.
• Tube connection 8 LL (M12x1) through a cutting ring in the very light series.
• Working pressure up to 100 bar.
• Temperature range -40 to +120 °C for the version in zinc-plated steel.

Applications

At a manifold with an R 1/8" thread the tee takes tube 8 LL (M12x1) and leads a second circuit away at the same time.

Standards and conformity

The stated temperature range -40 to +120 °C applies to the version in zinc-plated steel. An elastomer seal narrows it.