Male stud tee, R 1/4", tube 6 S, zinc-plated steel, heavy series

The male stud tee connects a precision tube through a cutting ring to a pipe thread and branches off a third path. This version is listed with male stud thread R 1/4" and tube connection 6 S (M14x1.5). Its rating is a working pressure of 630 bar. The version is listed with heavy series.

Benefits

• Male stud thread R 1/4" for a direct connection to a pump, valve or manifold.
• The third path of the tee saves an additional port on the device.
• Tube connection 6 S (M14x1,5) through a cutting ring in the heavy series.
• Working pressure up to 630 bar.
• Temperature range -40 to +120 °C for the version in zinc-plated steel.

Applications

For a measuring point on a line of the heavy series the second threaded port that would otherwise be needed is not required.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.