Male stud tee, R 1/4", tube 8 S, NC clamping ring 1.4571, heavy series

In use, the male stud tee connects a precision tube through a cutting ring to a pipe thread and branches off a third path. The data also state a temperature range of -60 to +400 °C. This version comes with male stud thread R 1/4" and tube connection 8 S (M16x1.5). In addition the data give heavy series and clamping system NC clamping ring.

Benefits

• Male stud thread R 1/4" for a direct connection to a pump, valve or manifold.
• The third path of the tee saves an additional port on the device.
• Tube connection 8 S (M16x1,5) through a cutting ring in the heavy series.
• Working pressure up to 500 bar.
• Temperature range -60 to +400 °C for the version in stainless steel 1.4571.

Applications

For a measuring point on a line of the heavy series the second threaded port that would otherwise be needed is not required.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.