Male stud tee, R 1/8", tube 6 LL, zinc-plated steel, no nut or ring

Once installed, the male stud tee connects a precision tube through a cutting ring to a pipe thread and branches off a third path. The data also state a temperature range of -40 to +120 °C. This version comes with male stud thread R 1/8" and tube connection 6 LL (M10x1). In addition the data give very light series and scope of delivery without nut and cutting ring.

Benefits

• Male stud thread R 1/8" for a direct connection to a pump, valve or manifold.
• The third path of the tee saves an additional port on the device.
• Tube connection 6 LL (M10x1) through a cutting ring in the very light series.
• Working pressure up to 100 bar.
• Temperature range -40 to +120 °C for the version in zinc-plated steel.

Applications

At a manifold with an R 1/8" thread the tee takes tube 6 LL (M10x1) and leads a second circuit away at the same time.

Standards and conformity

The stated temperature range -40 to +120 °C applies to the version in zinc-plated steel. An elastomer seal narrows it.