Male stud tee, R 1/4", tube 10 L, zinc-plated steel, no nut or ring

The male stud tee connects a precision tube through a cutting ring to a pipe thread and branches off a third path. This version comes with male stud thread R 1/4" and tube connection 10 L (M16x1.5). A further figure is a temperature range of -40 to +120 °C. This version is supplied with light series and scope of delivery without nut and cutting ring.

Benefits

• Male stud thread R 1/4" for a direct connection to a pump, valve or manifold.
• The third path of the tee saves an additional port on the device.
• Tube connection 10 L (M16x1,5) through a cutting ring in the light series.
• Working pressure up to 315 bar.
• Temperature range -40 to +120 °C for the version in zinc-plated steel.

Applications

In hydraulics the version in zinc-plated steel holds 315 bar on all three paths.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.