Male stud tee, R 1/8", tube 4 LL, stainless steel 1.4571, very light series

Once installed, the male stud tee connects a precision tube through a cutting ring to a pipe thread and branches off a third path. The article is listed with a working pressure of 100 bar. Material stainless steel 1.4571 is listed for this version. Also stated are very light series.

Benefits

• Male stud thread R 1/8" for a direct connection to a pump, valve or manifold.
• The third path of the tee saves an additional port on the device.
• Tube connection 4 LL (M8x1) through a cutting ring in the very light series.
• Working pressure up to 100 bar.
• Temperature range -60 to +400 °C for the version in stainless steel 1.4571.

Applications

In hydraulics the version in stainless steel 1.4571 holds 100 bar on all three paths.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.