Male stud tee, R 1/2", tube 18 L, stainless steel 1.4571, light series

Once installed, the male stud tee connects a precision tube through a cutting ring to a pipe thread and branches off a third path. The data state a working pressure of 315 bar. The stated figures are male stud thread R 1/2" and tube connection 18 L (M26x1.5). Also stated are light series.

Benefits

• Male stud thread R 1/2" for a direct connection to a pump, valve or manifold.
• The third path of the tee saves an additional port on the device.
• Tube connection 18 L (M26x1,5) through a cutting ring in the light series.
• Working pressure up to 315 bar.
• Temperature range -60 to +400 °C for the version in stainless steel 1.4571.

Applications

For a measuring point on a line of the light series the second threaded port that would otherwise be needed is not required.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.