Male stud tee, G 1-1/4", tube 35 L, zinc-plated steel, light series

In use, the male stud tee connects a precision tube through a cutting ring to a pipe thread and branches off a third path. The data also state a temperature range of -40 to +120 °C. Its rating is a working pressure of 160 bar. In addition the data give light series.

Benefits

• Male stud thread G 1-1/4" for a direct connection to a pump, valve or manifold.
• The third path of the tee saves an additional port on the device.
• Tube connection 35 L (M45x2) through a cutting ring in the light series.
• Working pressure up to 160 bar.
• Temperature range -40 to +120 °C for the version in zinc-plated steel.

Applications

For a measuring point on a line of the light series the second threaded port that would otherwise be needed is not required.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.