Male stud tee, G 3/4", tube 20 S, NC clamping ring 1.4571, heavy series

As a male stud tee the article connects a precision tube through a cutting ring to a pipe thread and branches off a third path. The data state a working pressure of 250 bar. Material stainless steel 1.4571 is listed for this version. Also stated are heavy series and clamping system NC clamping ring.

Benefits

• Male stud thread G 3/4" for a direct connection to a pump, valve or manifold.
• The third path of the tee saves an additional port on the device.
• Tube connection 20 S (M30x2) through a cutting ring in the heavy series.
• Working pressure up to 250 bar.
• Temperature range -60 to +400 °C for the version in stainless steel 1.4571.

Applications

For a measuring point on a line of the heavy series the second threaded port that would otherwise be needed is not required.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.