Male stud tee, G 1", tube 25 S, stainless steel 1.4571, heavy series

The male stud tee connects a precision tube through a cutting ring to a pipe thread and branches off a third path. The article is listed with a working pressure of 400 bar. This version is listed with male stud thread G 1" and tube connection 25 S (M36x2). The stated material is stainless steel 1.4571. This version is supplied with heavy series.

Benefits

• Male stud thread G 1" for a direct connection to a pump, valve or manifold.
• The third path of the tee saves an additional port on the device.
• Tube connection 25 S (M36x2) through a cutting ring in the heavy series.
• Working pressure up to 400 bar.
• Temperature range -60 to +400 °C for the version in stainless steel 1.4571.

Applications

In hydraulics the version in stainless steel 1.4571 holds 400 bar on all three paths.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.