Male stud tee, R 1/8", tube 4 LL, zinc-plated steel, no nut or ring

The male stud tee connects a precision tube through a cutting ring to a pipe thread and branches off a third path. In addition the sheet lists a temperature range of -40 to +120 °C. The stated figure is a working pressure of 100 bar. The version is listed with very light series and scope of delivery without nut and cutting ring.

Benefits

• Male stud thread R 1/8" for a direct connection to a pump, valve or manifold.
• The third path of the tee saves an additional port on the device.
• Tube connection 4 LL (M8x1) through a cutting ring in the very light series.
• Working pressure up to 100 bar.
• Temperature range -40 to +120 °C for the version in zinc-plated steel.

Applications

In hydraulics the version in zinc-plated steel holds 100 bar on all three paths.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.