Male stud tee, R 1/2", tube 15 L, NC clamping ring 1.4571, light series

The male stud tee connects a precision tube through a cutting ring to a pipe thread and branches off a third path. The data sheet gives a working pressure of 315 bar. This version is listed with male stud thread R 1/2" and tube connection 15 L (M22x1.5). The stated material is stainless steel 1.4571. This version is supplied with light series and clamping system NC clamping ring.

Benefits

• Male stud thread R 1/2" for a direct connection to a pump, valve or manifold.
• The third path of the tee saves an additional port on the device.
• Tube connection 15 L (M22x1,5) through a cutting ring in the light series.
• Working pressure up to 315 bar.
• Temperature range -60 to +400 °C for the version in stainless steel 1.4571.

Applications

At a manifold with an R 1/2" thread the tee takes tube 15 L (M22x1,5) and leads a second circuit away at the same time.

Standards and conformity

The stated temperature range -60 to +400 °C applies to the version in stainless steel 1.4571. An elastomer seal narrows it.