Male stud tee, R 1/2", tube 16 S, zinc-plated steel, heavy series

Once installed, the male stud tee connects a precision tube through a cutting ring to a pipe thread and branches off a third path. This version is listed with male stud thread R 1/2" and tube connection 16 S (M24x1.5). Decisive for the selection is a working pressure of 400 bar. In addition the data give heavy series.

Benefits

• Male stud thread R 1/2" for a direct connection to a pump, valve or manifold.
• The third path of the tee saves an additional port on the device.
• Tube connection 16 S (M24x1,5) through a cutting ring in the heavy series.
• Working pressure up to 400 bar.
• Temperature range -40 to +120 °C for the version in zinc-plated steel.

Applications

At a manifold with an R 1/2" thread the tee takes tube 16 S (M24x1,5) and leads a second circuit away at the same time.

Standards and conformity

The stated temperature range -40 to +120 °C applies to the version in zinc-plated steel. An elastomer seal narrows it.