Images are examples, some edited with AI. The technical data are authoritative. AI notice
Flow sensor 0.01 to 0.5 l/min for compressed air 6 mm tubing IO-Link SFAH-0.5U-Q6S-PNLK-PNVBA-M8 - Festo 610916
The flow sensor SFAH-0.5U-Q6S-PNLK-PNVBA-M8 is designed for mass flow and volumetric flow of compressed air between 0.01 l/min and 0.5 l/min. Outputs of the SFAH: two switching outputs, PNP or NPN selectable, plus analogue output 0 - 10 V, 4 - 20 mA, 1 - 5 V and IO-Link. Operating pressure -0.9 to 10 bar, connection for 6 mm tubing.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The Festo SFAH-0.5U-Q6S-PNLK-PNVBA-M8 records flow rates from 0.01 to 0.5 l/min directly in the line.
Benefits
- Measuring range 0.01 to 0.5 l/min, pressure drop 5 mbar
- Accuracy ± (2 % of measured value + 1 % FS), repetition accuracy zero point ±0.2 %FS, span ±0.8 %FS
- Measuring principle thermal, method Heat transfer
- Switching output 2 x PNP or 2 x NPN, switchable, analogue output 0 - 10 V, 4 - 20 mA, 1 - 5 V and IO-Link
- Multi-colour illuminated LCD, units g, g/min, l, l/h, l/min, scft, scft/h
- Operating pressure -0.9 to 10 bar, degree of protection IP40
Applications
Operating medium of the SFAH-0.5U-Q6S-PNLK-PNVBA-M8: compressed air to ISO 8573-1:2010 [6:4:4], nitrogen, flow direction unidirectional. Typical tasks up to 0.5 l/min include flow monitoring on compressed air consumers and in test rigs. The SFAH-0.5U-Q6S-PNLK-PNVBA-M8 runs on 22 to 26 V DC.
Technical data
| Type | SFAH-0.5U-Q6S-PNLK-PNVBA-M8 |
|---|---|
| Festo part number | 610916 |
| Approval | RCM, c UL us - Listed (OL) |
| CE mark (see declaration of conformity) | To EU EMC Directive, In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK RoHS instructions |
| Certificate issuing authority | UL E322346 |
| Note on materials | RoHS compliant |
| Measured variable | Mass flow rate, Volumetric flow rate |
| Flow direction | Unidirectional |
| Measuring principle | Thermal |
| Measurement method | Heat transfer |
| Start value for flow rate measuring range | 0.01 l/min |
| End value for flow rate measuring range | 0.5 l/min |
| Operating pressure | -0.9 to 10 bar |
| Operating medium | Compressed air to ISO 8573-1:2010 [6:4:4], Nitrogen |
| Media temperature | 0 to 50 °C |
| Ambient temperature | 0 to 50 °C |
| Nominal temperature | 23 °C |
| Accuracy of flow rate | ± (2 % of measured value + 1 % FS) |
| Repetition accuracy offset in ± %FS | 0.2 %FS |
| Repetition accuracy span in ± %FS | 0.8 %FS |
| Temperature coefficient span in ± %FS/K | typ. 0.15%FS/K |
| Pressure influence on span in ± %FS | Typ. 1 %FS |
| Switching output | 2 x PNP or 2 x NPN, switchable |
| Switching function | Window comparator, Threshold value comparator, Auto difference monitoring |
| Switching element function | NC or NO, switchable |
| Max. output current | 100 mA |
| Analogue output | 0 - 10 V, 4 - 20 mA, 1 - 5 V |
| Flow characteristic curve start value | 0 l/min |
| Flow characteristic curve end value | 0.5 l/min |
| Max. load resistance current output | 500 Ohm |
| Min. load resistance voltage output | 20 kOhm |
| Short circuit current rating | Yes |
| Overload protection | Available |
| Protocol | IO-Link |
| IO-Link, protocol version | Device V 1.1 |
| IO-Link, profile | Smart sensor profile |
| IO-Link, function classes | Binary data channel (BDC), Process data variable (PDV), Identification, Diagnostics, Teach channel |
| IO-Link, communication mode | COM2 (38.4 kBaud) |
| IO-Link, SIO mode support | Yes |
| IO-Link, Port class | A |
| IO-Link, process data width IN | 3 bytes |
| IO-Link, process data content IN | 1 bit BDC (volume monitoring), 14 bit PDV (measured flow value), 2 bit BDC (flow monitoring) |
| IO-Link, service data content IN | 32-bit volume / mass measured value |
| IO-Link, minimum cycle time | 4 ms |
| IO-Link, data storage required | 500 byte |
| Operational voltage range DC | 22 to 26 V |
| No-load supply current | 25 mA |
| Reverse polarity protection | For all electrical connections |
| Electrical connection 1, connection type | Plug |
| Electrical connection 1, connector system | M8x1, A-coded, to EN 61076-2-104 |
| Electrical connection 1, number of connections/cores | 4 |
| Electrical connection 1, type of mounting | Snap-locking, Screw-type lock, Not rotatable |
| Electrical connection 1, compatible type of mounting | Compatible with latching lock, Compatible with rotatable screw-type lock |
| Type of mounting | With accessories |
| Mounting position | Any |
| Pneumatic connection | For tubing O.D. 6 mm |
| Pneumatic connection, outlet direction | Straight |
| Product weight | 60 g |
| Material housing | Reinforced PA |
| Material in contact with the medium | Anodised wrought aluminium alloy, Epoxy, NBR, Reinforced PA, Silicon, Silicon nitride, High-alloy stainless steel |
| Display type | Illuminated LCD, multi-colour |
| Displayable units | g, g/min, l, l/h, l/min, scft, scft/h |
| Setting options | IO-Link, Teach-in, Via display and buttons |
| Protection against tampering | IO-Link, PIN code |
| Degree of protection | IP40 |
| Pressure drop | 5 mbar |
| Protection class | III |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B2-L |
| Cleanroom suitability, measured according to ISO 14644-14 | Class 4 according to ISO 14644-1 |
| Pollution degree | 3 |
| Weight | 0.08 kg |
| Manufacturer | Festo |
| Hersteller-Nr | SFAH-0.5U-Q6S-PNLK-PNVBA-M8 |
| EAN | 4052568574840 |
| Zolltarifnummer | 90268020 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Medientemperatur [°C] | 0 bis 50 |
| Operating voltage | 22-26 V |
| Series | SFAH |
| Betriebsdruck max [bar] | 10 |
| Protection rating | IP40 |
| Temperaturbereich | 0-50 °C |
| Temperature (max.) | 50 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.







