Images are examples, some edited with AI. The technical data are authoritative. AI notice
Flow Sensor SFAW-100T-TG34-E-PNLK-PNVBA-M# - Festo 8036876
Festo sensor for reliable monitoring of position, pressure or status in the pneumatic system.
Net
excl. VAT
€439.66
Item
FES-8036876
Manufacturer no.
SFAW-100T-TG34-E-PNLK-PNVBA-M#
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
Festo sensor for reliable monitoring of position, pressure or status in the pneumatic system. The key technical data of this genuine Festo article are listed below.
Technical data
| Permission | RCM mark<br>c UL us - Listed (OL) |
|---|---|
| CE certificate (see declaration of conformity) | acc. to EU-EMV Directive<br>acc. to EU-RoHS Directive |
| KC-mark | KC-EMV |
| Material information | RoHs compliant |
| Measured parameter | flow<br>temperature |
| Flow direction | P1 -> P2<br>Uni-directional |
| Measurement process | temperature: PT1000<br>Flow: Vortex |
| Flow measurement range starting value [l/min] | 5,0 |
| Flow measurement range end value [l/min] | 100 |
| Operating pressure [bar] | 0 to 12 |
| Information about operating pressure | max. 12 bar at 40°C<br>max. 6 bar at 100°C |
| Operating medium | Fluid media<br>Neutral liquids<br>Water |
| Information about operating and control medium | Media compatibility to the media contacting materials must be guaranteed |
| Medium temperature [°C] | 0 to 90 |
| ambient temperature [°C] | 0 to 50 |
| Nominal temperature [°C] | 23 |
| Accuracy flow value | ±2 %FS for flow <= 50 %FS<br>± 3 % o.m.v. for flow >= 50 %FS |
| Accuracy temperature in ± °C [°C] | 2 |
| Repeatability flow value | < ±0.5 %FS for flow <= 50 %FS<br>< ±1 % o.m.v. for flow >= 50 %FS |
| Temperature coefficient clamp in ± %FS/K | type ±0,05%FS/K |
| Control output | 2 x PNP or 2 x NPN switchable |
| Switch function | Window comparator<br>Threshold comparator<br>Freely programmable |
| Switching element function | Opener/closer switchable |
| Max. output current [mA] | 100 |
| Analogue output | 0 - 10 V<br>4 - 20 mA<br>1 - 5 V |
| Flow characteristic curve starting value [l/min] | 0 |
| Flow characteristic curve end value [l/min] | 100 |
| Max. load resistance current output [Ohm] | 500 |
| Min. load resistance voltage output [kOhm] | 15 |
| Short circuit resistance | yes |
| Overload resistant | Available |
| Report | IO-Link |
| IO-Link, report | Device V 1.1 |
| IO-Link, profile | Smart sensor profile |
| IO-Link, function classes | Teach channel<br>Diagnosis<br>Identification<br>Binary data channel (BDC)<br>Process data variables (PDV) |
| IO-Link, communication mode | COM2 (38.4 kBaud) |
| IO-Link, SIO mode support | yes |
| IO-Link, port type | A |
| IO-Link, process data width OUT | 0 Bytes |
| IO-Link, process data width IN | 5 Bytes |
| IO-Link, process data contents IN | 1 bit BDC (volume monitoring)<br>14 bit PDV (flow measurement)<br>1 bit BDC (temperature monitoring)<br>14 bit PDV (temperature measurement)<br>2 bit BDC (flow measurement) |
| IO-Link, service data unit IN | 32 bit Volumenmesswert |
| IO-Link, minimum cycle time | 5 ms |
| IO-Link, data memory needed [Byte] | 500 |
| Operating voltage range DC [V] | 18 to 30 |
| Reverse polarity protection | for all electrical connections |
| Electrical connection | M12x1<br>5 pin<br>Plug straight<br>A-coded |
| Max. line length | 30 m<br>20 m For OK link operation |
| installation position | arbitrary |
| Fluid connection | female thread G3/4 |
| Product weight [g] | 530 |
| Housing material | PA reinforced |
| From medium contacting materials | EPDM (perox.)<br>ETFE<br>stainless steel<br>PA6T/6I reinforced |
| Presentable unit(s) | US gal<br>US gal/min<br>cft<br>cft/min<br>l<br>l/h<br>l/min<br>m3<br>°C<br>°F |
| Protection category | IP65 |
| Corrosion resistant class KBK | 3 - severe corrosion stress |
| Temperature measurement range stating value [°C] | 0 |
| Temperature measurement range end value [°C] | 90 |
| Temperature characteristic curve starting value [°C] | 0 |
| Temperature characteristic curve end value [°C] | 100 |
| Weight | 0.450000 |
| Manufacturer | Festo |
| Hersteller-Nr | SFAW-100T-TG34-E-PNLK-PNVBA-M# |
| EAN | 4052568285326 |
| Zolltarifnummer | 90261021 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Polyamide (PA) |
| Corrosion resistance class CRC | 3 - severe corrosion stress |
| Mounting position | arbitrary |
| Series | SFAW |
| Betriebsdruck max [bar] | 12.000000 |
| Protection rating | IP65 |
| Temperature (max.) | 50 |
Downloads
Accessories
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day. Ask a question