Images are examples, some edited with AI. The technical data are authoritative. AI notice

Flow sensor 5 to 100 l/min for liquids G1 IO-Link SFAW-100T-TG1-E-PNLK-PNVBA-M12 - Festo 8036878

Festo ✓ Original product Brand new

The flow sensor SFAW-100T-TG1-E-PNLK-PNVBA-M12 is designed for flow rate and temperature of liquids between 5 l/min and 100 l/min. Outputs of the SFAW: two switching outputs, PNP or NPN selectable, plus analogue output 0 - 10 V, 4 - 20 mA, 1 - 5 V and IO-Link. Operating pressure 0 to 12 bar, connection female thread G1.

Net
€439.66
excl. VAT
Item FES-8036878
Manufacturer no. SFAW-100T-TG1-E-PNLK-PNVBA-M12
Question about this item
  • Specialist dealer since 2009
  • Invoice payment for regular customers
  • Worldwide shipping
  • Technical questions clarified with the manufacturer

Description

With the Festo SFAW-100T-TG1-E-PNLK-PNVBA-M12 you record flow rate and temperature within 5 to 100 l/min and evaluate the values on the device or in the controller.

Benefits

  • Measuring range 5 to 100 l/min
  • Measurement method Temperature: PT1000, Flow: Vortex
  • Additional temperature measurement 0 to 90 °C
  • Switching output 2 x PNP or 2 x NPN, switchable, analogue output 0 - 10 V, 4 - 20 mA, 1 - 5 V and IO-Link
  • Operating pressure 0 to 12 bar, degree of protection IP65

Applications

Operating medium of the SFAW-100T-TG1-E-PNLK-PNVBA-M12: liquid media, neutral fluids, water, flow direction P1 to P2, unidirectional. Typical tasks up to 100 l/min include monitoring cooling and process water circuits. The SFAW-100T-TG1-E-PNLK-PNVBA-M12 runs on 18 to 30 V DC.

Technical data

TypeSFAW-100T-TG1-E-PNLK-PNVBA-M12
Festo part number8036878
ApprovalRCM, c UL us - Listed (OL)
CE mark (see declaration of conformity)To EU EMC Directive, to EU RoHS Directive
KC markKC-EMV
Note on materialsRoHS compliant
Measured variableflow, temperature
Flow directionP1 to P2, Unidirectional
Measurement methodTemperature: PT1000, Flow: Vortex
Start value for flow rate measuring range5 l/min
End value for flow rate measuring range100 l/min
Operating pressure0 to 12 bar
Note on operating pressuremax. 12 bar at 40 °C, max. 6 bar at 100 °C
Operating mediumLiquid media, Neutral fluids, Water
Note on operating and pilot mediumCompatibility of the medium with the wetted materials must be ensured
Media temperature0 to 90 °C
Ambient temperature0 to 50 °C
Nominal temperature23 °C
Accuracy temperature in ± °C2 °C
Temperature coefficient span in ± %FS/Ktyp. ±0.05%FS/K
Switching output2 x PNP or 2 x NPN, switchable
Switching functionWindow comparator, Threshold comparator, Freely programmable
Switching element functionNC or NO, switchable
Max. output current100 mA
Analogue output0 - 10 V, 4 - 20 mA, 1 - 5 V
Flow characteristic curve start value0 l/min
Flow characteristic curve end value100 l/min
Max. load resistance current output500 Ohm
Min. load resistance voltage output15 kOhm
Short circuit current ratingYes
Overload protectionAvailable
ProtocolIO-Link
IO-Link, protocol versionDevice V 1.1
IO-Link, profileSmart sensor profile
IO-Link, function classesTeach channel, Diagnostics, Identification, Binary data channel (BDC), Process data variable (PDV)
IO-Link, communication modeCOM2 (38.4 kBaud)
IO-Link, SIO mode supportYes
IO-Link, port typeA
IO-Link, process data width OUT0 bytes
IO-Link, process data width IN5 Byte
IO-Link, process data content IN1 bit BDC (volume monitoring), 14 bit PDV (measured flow value), 1 bit BDC (temperature monitoring), 14 bit PDV (measured temperature value), 2 bit BDC (flow monitoring)
IO-Link, service data content IN32 bit measured volume value
IO-Link, minimum cycle time5 ms
IO-Link, data storage required500 Byte
Operational voltage range DC18 to 30 V
Reverse polarity protectionFor all electrical connections
Electrical connectionM12x1, 5-pin, straight plug, A-coded
Max. cable length30 m, 20 m in IO-Link mode
Mounting positionAny
Fluid connectionFemale thread G1
Product weight400 g
Material housingReinforced PA
Material in contact with the mediumEPDM (perox.), ETFE, stainless steel, reinforced PA6T/6I
Displayable unitsUS gal, US gal/min, cft, cft/min, l, l/h, l/min, m3, °C, °F
Degree of protectionIP65
Corrosion resistance class CRC3 - high corrosion stress
Temperature measuring range start value0 °C
Temperature measuring range end value90 °C
Temperature characteristic curve start value0 °C
Temperature characteristic curve end value100 °C
Weight0.48 kg
ManufacturerFesto
Hersteller-NrSFAW-100T-TG1-E-PNLK-PNVBA-M12
EAN4052568285340
Zolltarifnummer90261021
GPSR HerstellerdatenFesto Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
ArtikelzustandNew
Artikel-AuthentizitätOriginal product
MaterialPolyamide (PA)
ThreadG 1
Medientemperatur [°C]0 bis 90
Operating voltage18-30 V
SeriesSFAW
Betriebsdruck max [bar]12
Pneumatic connectionG1
Protection ratingIP65
Temperaturbereich0-50 °C
Temperature (max.)50

Downloads

Accessories

Questions about this item

Any other question?

Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.