Straight bulkhead weld coupling, tube 10 S, socket 25 mm, phosphated steel

Once installed, the bulkhead coupling takes the tube line through a wall and is welded in on the vessel side with its socket. It is produced from phosphated steel. The data give tube outside diameter 10 S and weld socket 25 mm.

Benefits

• The weld socket of 25 mm diameter is welded into the wall and carries the coupling.
• Tube 10 S belongs to the heavy series and sets the union nut and the cutting ring.
• The working pressure of 630 bar applies to the fully assembled coupling.
• The temperature range covers -40 to +120 °C.
• The version in phosphated steel sets the corrosion protection and the temperature limit of the joint.

Applications

On hydraulic tanks the coupling takes tube 10 S outwards through the welded 25 mm socket.