Pressure Reducing Valve DREME10-6X/315YMG24K31A1M - Bosch Rexroth R901289456

The 315 bar pressure stage reaches up to the maximum operating pressure of the valve, so the reduced pressure can be set across the whole system range. The DREME10-6X/315YMG24K31A1M takes a 0...10 V command and passes up to 300 l/min.

Benefits

• 315 bar pressure stage, command range up to the maximum operating pressure of the valve
• Up to 300 l/min flow across three ports to ISO 5781
• 0...10 V command from the controller, on-board electronics, 24 VDC
• 7-pole (6 + PE) plug to EN 175201-804, two switching positions
• 5.02 kg, NBR seals, HL hydraulic fluid, spool symbol B to A

Applications

The valve is used in presses, forging lines and test rigs whose branch circuits work close to system pressure. It keeps the set value even when the actuator load swings hard. The subplate follows ISO 5781 in size 10.

Manufacturer

Bosch Rexroth, material number R901289456. Characteristic curves and installation dimensions are given in data sheet RE 29276.