Pressure Reducing Valve 3DREE16P-7X/200YG24K31F1V - Bosch Rexroth R901226627

Where someone used to correct the setting with a screwdriver, the controller takes over here. The 3DREE16P-7X/200Y build sets the pressure from P to A to the value a 4...20 mA current command dictates, and thereby records it traceably in the program. Up to 300 l/min maximum flow and 315 bar operating pressure are permitted.

Benefits

• Electrical pressure setting instead of manual adjustment, 4...20 mA command value
• The set value lives in the control program and stays traceable
• Up to 300 l/min maximum flow in size 16
• Operating pressure up to 315 bar, hole pattern ISO 4401-07-07-0-05, external pilot oil drain
• On-board electronics, 24 VDC, 7-pole connector (6 + PE) to EN 175201-804
• FKM seals for HL hydraulic fluid, 9.82 kg unit weight, UKCA conformity for EMC SI2016/1091

Application

The change makes sense wherever branch pressure used to be set by hand and operators could alter it unintentionally. In series production, test fields and plants with documentation duties the value stays reproducible. Before swapping, compare hole pattern, pressure range and seal material.

Manufacturer

The Bosch Rexroth material number is R901226627.