Pressure Reducing Valve DREE30-6X/100YG24K31F1M - Bosch Rexroth R901374745

A secondary circuit meant to run around 100 bar needs a reducing valve with a matching pressure rating. The DREE30-6X/100YG24K31F1M is built around rating 100 of the type code, follows a 4...20 mA command value and handles up to 300 l/min.

Benefits

• Pressure rating 100 in the type code, matched to circuits at medium working pressure.
• Command value as a 4...20 mA current signal, so a broken wire shows up as a zero reading.
• On-board electronics inside the valve, no separate amplifier card required.
• Up to 300 l/min flow at a maximum operating pressure of 315 bar.
• Connection diagram ISO 5781, subplate mounting with three ports and spool symbol B to A.
• 9.68 kg weight with NBR seals, 24 V DC supply through a 7-pole connector (6 + PE).

Applications

Suited to clamping, hold-down and feed circuits whose pressure is set by the plant control system and changed during the sequence. The current signal stays readable over longer cable runs back to the cabinet.

Manufacturer

Bosch Rexroth, material number R901374745, product family DRE(M)(E)30. Wiring uses a 7-pole connector to EN 175201-804, and conformity is stated as UKCA for electromagnetic compatibility SI2016/1091.