Pressure Reducing Valve 3DREM16P-7X/200XYG24K4V - Bosch Rexroth R901213621
-
This Item:
€3,447.14
-
Pressure Reducing Valve 3DRE10P-7X/100YG24K4V - Bosch Rexroth R901152348
€3,150.56
-
Pressure Reducing Valve DRE30-6X/200YG24K4M - Bosch Rexroth R901311434
€2,291.95
A test cycle with defined pressure steps needs a valve that follows the signal and holds the value. The 3DREM16P-7X/200XYG24K4V does that in size 16, with 300 l/min flow and 315 bar maximum operating pressure.
Benefits
- Repeatable pressure steps through proportional control to the command value.
- 300 l/min flow, connection diagram ISO 4401-07-07-0-05.
- 315 bar maximum operating pressure with two switching positions.
- FKM seals, suited to long test runs with warm oil.
- 10.04 kg weight, controlled with 24 V DC through external electronics.
Technical data
| Connection diagram | ISO 4401-07-07-0-05 |
| Max. flow | 300 l/min |
| Product family | 3DRE(M)(E) |
| Type of connection | Subplate mounting |
| Supply voltage | 24 VDC |
| Number of switching positions | 2 |
| Hydraulic fluid | HL |
| Number of ports | 4 |
| Electrical connection description | Connector 3-pole (2 + PE) according to EN 175301-803 |
| Spool symbol | P to A |
| Operating pressure, max. | 315 bar |
| Size | 16 |
| Seals | FKM |
| Electrical connector | Connector, 3-pole (2 + PE) |
| Type of actuation | Electrical with external electronics |
| Weight | 10.04 kg |
Application
The version is used in test rigs, press circuits and systems with programmed pressure profiles. The command value comes from the control system and the valve applies it at the actuator port.
Manufacturer
Bosch Rexroth lists the version in product family 3DRE(M)(E). In the Bosch Rexroth range the version carries material number R901213621.
| Weight | 10.040000 |
|---|---|
| Manufacturer | Bosch Rexroth |
| Hersteller-Nr | R901213621 |
| GPSR Herstellerdaten | Bosch Rexroth AG, Zum Eisengießer 1, DE-97816 Lohr am Main, www.boschrexroth.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Country of Manufacture | Germany |
| Norm | DIN EN 175301-803, ISO 4401 |










