Pressure Reducing Valve 3DREE16P-7X/50YG24K31A1V - Bosch Rexroth R901271814

When handling delicate parts, contact pressure decides between scrap and a good part. The 3DREE16P-7X/50Y build holds it in the branch from P to A at the value the controller supplies as a 0...10 V voltage. Pilot oil is drained externally, and up to 300 l/min maximum flow at 315 bar operating pressure is permitted.

Benefits

• Contact pressure set electrically from a 0...10 V command, no manual readjustment
• Pressure reduction from P to A with an external pilot oil drain
• Up to 300 l/min maximum flow, operating pressure up to 315 bar
• Size 16, subplate mounting to ISO 4401-07-07-0-05, two switching positions, four ports
• On-board electronics at the valve, 24 VDC supply through a 7-pole connector (6 + PE) to EN 175201-804
• FKM seals for HL hydraulic fluid, 9.84 kg unit weight, UKCA conformity for EMC SI2016/1091

Application

The valve is meant for grippers, blank holders and feed units that must grasp parts with limited force. Through the analogue command a separate pressure can be stored for each part type. The build is recorded in the type designation 3DREE16P-7X/50YG24K31A1V.

Manufacturer

Bosch Rexroth lists this valve under material number R901271814.