Pressure Reducing Valve DREME10-6X/200YG24K31F1V - Bosch Rexroth R901394963

The command arrives as a current, the control loop sits inside the body: the DREME10-6X/200YG24K31F1V accepts 4...20 mA and holds the reduced pressure steady even when throughput in the secondary circuit rises to 300 l/min.

Advantages

• 4...20 mA command and on-board electronics, the control loop stays inside, with no external amplifier.
• 300 l/min limit throughput at 315 bar, acting from B to A across three ports.
• 4.96 kg mass in size 10, ISO 5781 hole pattern, UKCA declared to SI2016/1091.
• ISO 5781 pattern, size 10, rated up to 315 bar operating pressure.
• Connector, 7-pole (6 + PE) for the electrical link, 24 VDC supply.
• 4.96 kg mass, FKM seals, HL grade fluid.

Applications

The unit serves clamping and preload circuits, counter-holding stages and any place where a second pressure level is driven electrically. A current command stays stable over long cable runs and in electrically noisy surroundings. Swapping it against identical units of the DRE(M)(E)10 series needs no rework.

Manufacturer

Manufacturer Bosch Rexroth, material number R901394963. Data sheet RE 29276 carries the characteristic curves and installation dimensions.