Multi-line connectors
Inserts for Six-Tube and Ten-Tube
Individual body and plug inserts populate the CPC Six-Tube and Ten-Tube housings one line at a time. This lets you combine sizes and valved or non-valved versions in a single housing. The inserts are made of black or white acetal (POM) or polypropylene, with hose barbs of 1/16" (1.6 mm), 1/8" (3.2 mm) or metric 3 mm, rated from vacuum to 6.9 bar per line.
Inserts by material and seal
These links filter within this category.
- 16 items
- 1 manufacturer
- Net prices plus VAT
Buying guide
How to choose Inserts for Six-Tube and Ten-Tube
What matters when choosing: properties, comparison and typical applications.
Selection criteria
| Criterion | What matters | In the range |
|---|---|---|
| Side | Body inserts go into the coupling housing, plug inserts into the insert housing. | Body inserts TFF and TFFD, plug inserts TMF |
| Shut-off | Valved inserts keep their line closed when disconnected. | Valved (TFFD) or non-valved |
| Tube size | The barb has to match the tubing inner diameter. | 1/16" (1.6 mm), 1/8" (3.2 mm), metric 3 mm |
| Material | Choose by fluid; colour helps with line identification. | Black or white acetal, polypropylene |
| Pressure | The rating applies to each individual line. | Vacuum to 6.9 bar per line |
Frequently asked questions
- Why would I need individual inserts?
- Empty Six-Tube and Ten-Tube housings are populated with inserts. This lets you choose tube size, material and shut-off for each line.
- Can valved and non-valved inserts be mixed in one housing?
- Yes, each position is populated separately. The body insert and plug insert in the same position have to match.
- Which tube sizes are available?
- Hose barbs for 1/16" (1.6 mm), 1/8" (3.2 mm) and metric 3 mm.
- What pressure do the inserts handle?
- From vacuum to 6.9 bar per line, in line with the Six-Tube and Ten-Tube housings.