Multi-Tube non-valved insert fitting, 1/16" (1.6 mm) hose barb, white acetal, BUNA-N seal - CPC TMF01MWHT

TMF01MWHT is technically the same as the black 1/16" insert fitting, but its housing is natural, white acetal. That lets you flag individual lines on the insert side. CPC rates each line from vacuum to 6.9 bar (100 psi), and the seal is BUNA-N.

Applications

CPC Multi-Tube couplings connect and disconnect two, six or ten separate fluid or air lines in one step. This insert fitting is intended for the Sixtube and Tentube multi-line couplings.

• Sixtube: up to six lines, CPC thumb latch, low-profile snap-in panel mount
• Tentube: up to ten lines, slide latch, panel mount or in-line versions
• Equipment where several small-bore tubes are coupled and released together

Benefits

• 1.6 mm (1/16") hose barb for direct tube connection
• White natural acetal for visually marking individual lines
• Mating parts: TFFD02, TFFD02MWHT, TFF01, TFF02, TFFDM3, TFFD01, TFFM3, TFF0112, TFF02MWHT
• Open passage with no valve in the flow path, built as a non-valved fitting
• Handles vacuum and pressure up to 6.9 bar (100 psi) per line, as rated by CPC

Packing unit

Packing unit: 100 pcs. Price per piece, ordered in steps of 100 pcs.

Datasheet

The Multi-Tube series datasheet is available under Downloads.