Multi-Tube non-valved insert fitting, 1/16" (1.6 mm) hose barb, polypropylene - CPC TMF0112

TMF0112 builds the insert side of a Multi-Tube coupling in polypropylene. A 1/16" barb takes 1.6 mm tubing, and CPC states vacuum to 6.9 bar (100 psi) per line. The fitting is non-valved.

Applications

CPC Multi-Tube couplings connect and disconnect two, six or ten separate fluid or air lines in one step. This insert fitting is intended for the Sixtube and Tentube multi-line couplings.

• Sixtube: up to six lines, CPC thumb latch, low-profile snap-in panel mount
• Tentube: up to ten lines, slide latch, panel mount or in-line versions
• Equipment where several small-bore tubes are coupled and released together

Benefits

• Handles vacuum and pressure up to 6.9 bar (100 psi) per line, as rated by CPC
• 1.6 mm (1/16") hose barb for direct tube connection
• Polypropylene housing as a material alternative to acetal
• Mating parts: TFFD02, TFFD02MWHT, TFF01, TFF02, TFFDM3, TFFD01, TFFM3, TFF0112, TFF02MWHT
• Open passage with no valve in the flow path, built as a non-valved fitting

Packing unit

Packing unit: 100 pcs. Price per piece, ordered in steps of 100 pcs.

Datasheet

The Multi-Tube series datasheet is available under Downloads.