Multi-line connectors
Six-Tube
CPC Six-Tube connects and releases up to six separate fluid or air lines with one coupling. It locks with the CPC thumb latch, and the insert side snaps flush into an equipment front panel. Housings are acetal (POM) or polypropylene, with hose barbs of 1/16" (1.6 mm), 1/8" (3.2 mm) or metric 3 mm, rated from vacuum to 6.9 bar per line and from -40 to 82 °C.
Six-Tube by material and seal
These links filter within this category.
- 21 items
- 1 manufacturer
- Net prices plus VAT
Buying guide
How to choose Six-Tube
What matters when choosing: properties, comparison and typical applications.
Selection criteria
| Criterion | What matters | In the range |
|---|---|---|
| Configuration | Pre-fitted parts are ready to use; empty housings are populated with inserts as needed. | Bodies and inserts with hose barbs, housings without barbs (SX17, SX42) |
| Shut-off | With shut-off valves the lines stay closed when disconnected. | Non-valved or with shut-off valves (SXFD) |
| Tube size | The barbs have to match the tubing inner diameter. | 1/16" (1.6 mm), 1/8" (3.2 mm), metric 3 mm |
| Mounting | The insert side sits flush in the front panel, the body side hangs in the line. | Bulkhead and panel mount, in-line, free floating |
| Material | Choose by fluid. | Acetal, polypropylene |
| Pressure and temperature | The rating applies per line. | Vacuum to 6.9 bar, -40 to 82 °C |
Frequently asked questions
- How many lines does Six-Tube connect?
- Up to six separate fluid or air lines in one housing, connected and released in one movement.
- How is Six-Tube mounted?
- The insert side snaps into a cut-out in the front panel and protrudes only slightly. The body side hangs free in the line.
- Can I populate Six-Tube myself?
- Yes. Housings without hose barbs are fitted with inserts, which you will find in the Inserts for Six-Tube and Ten-Tube category.
- What pressure can Six-Tube handle?
- From vacuum to 6.9 bar per line, at -40 to 82 °C.