Adjustable T connector, tube 16 S, zinc-plated steel, no nut or ring

As a adjustable T connector the article branches a second line off a tube stud and takes the tube through a cutting ring. The data sheet gives a working pressure of 400 bar. The stated figures are tube stud 16 S and tube connection 16 S (M24x1.5). Also stated are heavy series and scope of delivery without nut and cutting ring.

Benefits

• The branch can point in any direction before it is locked, so tube 16 S (M24x1,5) can be laid without rework.
• Tube stud 16 S and tube connection 16 S (M24x1,5) in the same size.
• Working pressure up to 400 bar in the heavy series.
• Temperature range -40 to +120 °C for the body in zinc-plated steel.
• When tightened the cutting ring bites into the tube, so no extra seal is needed.

Applications

In a hydraulic line 16 S (M24x1,5) the tee sets the branch for a second consumer without cutting the main line.

Standards and conformity

The stated temperature range -40 to +120 °C applies to the version in zinc-plated steel. An elastomer seal narrows it.