Adjustable T connector, tube 16 S, stainless steel 1.4571, heavy series

Once installed, the adjustable T connector branches a second line off a tube stud and takes the tube through a cutting ring. It is supplied with tube stud 16 S and tube connection 16 S (M24x1.5). It is produced from stainless steel 1.4571. In addition the data give heavy series.

Benefits

• The branch can point in any direction before it is locked, so tube 16 S (M24x1,5) can be laid without rework.
• Tube stud 16 S and tube connection 16 S (M24x1,5) in the same size.
• Working pressure up to 400 bar in the heavy series.
• Temperature range -60 to +400 °C for the body in stainless steel 1.4571.
• When tightened the cutting ring bites into the tube, so no extra seal is needed.

Applications

In a hydraulic line 16 S (M24x1,5) the tee sets the branch for a second consumer without cutting the main line.

Standards and conformity

The stated temperature range -60 to +400 °C applies to the version in stainless steel 1.4571. An elastomer seal narrows it.