Adjustable T connector, tube 6 L, zinc-plated steel, no nut or ring

Once installed, the adjustable T connector branches a second line off a tube stud and takes the tube through a cutting ring. The data also state a temperature range of -40 to +120 °C. Decisive for the selection is a working pressure of 315 bar. In addition the data give light series and scope of delivery without nut and cutting ring.

Benefits

• The branch can point in any direction before it is locked, so tube 6 L (M12x1,5) can be laid without rework.
• Tube stud 6 L and tube connection 6 L (M12x1,5) in the same size.
• Working pressure up to 315 bar in the light series.
• Temperature range -40 to +120 °C for the body in zinc-plated steel.
• When tightened the cutting ring bites into the tube, so no extra seal is needed.

Applications

In a hydraulic line 6 L (M12x1,5) the tee sets the branch for a second consumer without cutting the main line.

Standards and conformity

The stated temperature range -40 to +120 °C applies to the version in zinc-plated steel. An elastomer seal narrows it.