Adjustable T connector, tube 42 L, stainless steel 1.4571, light series

The adjustable T connector branches a second line off a tube stud and takes the tube through a cutting ring. In addition the sheet lists a temperature range of -60 to +400 °C. The stated figure is a working pressure of 160 bar. The version is listed with light series.

Benefits

• The branch can point in any direction before it is locked, so tube 42 L (M52x2) can be laid without rework.
• Tube stud 42 L and tube connection 42 L (M52x2) in the same size.
• Working pressure up to 160 bar in the light series.
• Temperature range -60 to +400 °C for the body in stainless steel 1.4571.
• When tightened the cutting ring bites into the tube, so no extra seal is needed.

Technical data

Applications

At tube stud 42 L of a plant in stainless steel 1.4571 this creates a test or measuring point.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.