Adjustable T connector, tube 6 S, stainless steel 1.4571, no nut or ring

The adjustable T connector branches a second line off a tube stud and takes the tube through a cutting ring. This version comes with tube stud 6 S and tube connection 6 S (M14x1.5). A further figure is a temperature range of -60 to +400 °C. This version is supplied with heavy series and scope of delivery without nut and cutting ring.

Benefits

• The branch can point in any direction before it is locked, so tube 6 S (M14x1,5) can be laid without rework.
• Tube stud 6 S and tube connection 6 S (M14x1,5) in the same size.
• Working pressure up to 630 bar in the heavy series.
• Temperature range -60 to +400 °C for the body in stainless steel 1.4571.
• When tightened the cutting ring bites into the tube, so no extra seal is needed.

Applications

In a hydraulic line 6 S (M14x1,5) the tee sets the branch for a second consumer without cutting the main line.

Standards and conformity

The stated temperature range -60 to +400 °C applies to the version in stainless steel 1.4571. An elastomer seal narrows it.