Adjustable T connector, tube 12 S, zinc-plated steel, no nut or ring

Once installed, the adjustable T connector branches a second line off a tube stud and takes the tube through a cutting ring. In addition the sheet lists a temperature range of -40 to +120 °C. This version comes with tube stud 12 S and tube connection 12 S (M20x1.5). The version is listed with heavy series and scope of delivery without nut and cutting ring.

Benefits

• The branch can point in any direction before it is locked, so tube 12 S (M20x1,5) can be laid without rework.
• Tube stud 12 S and tube connection 12 S (M20x1,5) in the same size.
• Working pressure up to 630 bar in the heavy series.
• Temperature range -40 to +120 °C for the body in zinc-plated steel.
• When tightened the cutting ring bites into the tube, so no extra seal is needed.

Applications

In a hydraulic line 12 S (M20x1,5) the tee sets the branch for a second consumer without cutting the main line.

Standards and conformity

The stated temperature range -40 to +120 °C applies to the version in zinc-plated steel. An elastomer seal narrows it.