Adjustable T connector, tube 10 L, stainless steel 1.4571, no nut or ring

The adjustable T connector branches a second line off a tube stud and takes the tube through a cutting ring. The article is listed with a working pressure of 315 bar. The stated figures are tube stud 10 L and tube connection 10 L (M16x1.5). This version is supplied with light series and scope of delivery without nut and cutting ring.

Benefits

• The branch can point in any direction before it is locked, so tube 10 L (M16x1,5) can be laid without rework.
• Tube stud 10 L and tube connection 10 L (M16x1,5) in the same size.
• Working pressure up to 315 bar in the light series.
• Temperature range -60 to +400 °C for the body in stainless steel 1.4571.
• When tightened the cutting ring bites into the tube, so no extra seal is needed.

Technical data

Applications

At tube stud 10 L of a plant in stainless steel 1.4571 this creates a test or measuring point.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.