Adjustable T connector, tube 38 S, zinc-plated steel, heavy series

As a adjustable T connector the article branches a second line off a tube stud and takes the tube through a cutting ring. The data state a working pressure of 315 bar. This version is listed with tube stud 38 S and tube connection 38 S (M52x2). Material zinc-plated steel is listed for this version. Also stated are heavy series.

Benefits

• The branch can point in any direction before it is locked, so tube 38 S (M52x2) can be laid without rework.
• Tube stud 38 S and tube connection 38 S (M52x2) in the same size.
• Working pressure up to 315 bar in the heavy series.
• Temperature range -40 to +120 °C for the body in zinc-plated steel.
• When tightened the cutting ring bites into the tube, so no extra seal is needed.

Applications

When extending an existing line of the heavy series the tube routing is kept because the branch can be adjusted.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.