Adjustable T connector, tube 30 S, stainless steel 1.4571, no nut or ring

The adjustable T connector branches a second line off a tube stud and takes the tube through a cutting ring. In addition the sheet lists a temperature range of -60 to +400 °C. This version comes with tube stud 30 S and tube connection 30 S (M42x2). The version is listed with heavy series and scope of delivery without nut and cutting ring.

Benefits

• The branch can point in any direction before it is locked, so tube 30 S (M42x2) can be laid without rework.
• Tube stud 30 S and tube connection 30 S (M42x2) in the same size.
• Working pressure up to 400 bar in the heavy series.
• Temperature range -60 to +400 °C for the body in stainless steel 1.4571.
• When tightened the cutting ring bites into the tube, so no extra seal is needed.

Applications

In a hydraulic line 30 S (M42x2) the tee sets the branch for a second consumer without cutting the main line.

Standards and conformity

The stated temperature range -60 to +400 °C applies to the version in stainless steel 1.4571. An elastomer seal narrows it.