Adjustable T connector with cone, tube 12 S, stainless steel 1.4571

As a adjustable T connector the article splits a line into two paths and joins the tube to a tube stud with a sealing cone and an O-ring. The data sheet gives a working pressure of 630 bar. This version is listed with tube stud 12 S and tube connection 12 S (M20x1.5). Material stainless steel 1.4571 is listed for this version. Also stated are heavy series.

Benefits

• The tee branches the line off without needing a second port on the device.
• The branch can be set to any direction before it is locked, so tube 12 S (M20x1,5) stays free of stress.
• Sealing cone with an O-ring at tube stud 12 S for a soft joint that can be undone repeatedly.
• Working pressure up to 630 bar in the heavy series.
• Temperature range -20 to +200 °C for the body in stainless steel 1.4571.

Applications

For a gauge take-off the tee is set into line 12 S (M20x1,5) while the main line stays continuous.

Standards and conformity

The stated temperature range -20 to +200 °C applies to the version in stainless steel 1.4571. An elastomer seal narrows it.