Adjustable T connector with cone, tube 42 L, zinc-plated steel

This adjustable T connector splits a line into two paths and joins the tube to a tube stud with a sealing cone and an O-ring. The stated material is zinc-plated steel. The article is listed with a working pressure of 160 bar. This version is supplied with light series.

Benefits

• The tee branches the line off without needing a second port on the device.
• The branch can be set to any direction before it is locked, so tube 42 L (M52x2) stays free of stress.
• Sealing cone with an O-ring at tube stud 42 L for a soft joint that can be undone repeatedly.
• Working pressure up to 160 bar in the light series.
• Temperature range -35 to +100 °C for the body in zinc-plated steel.

Applications

When splitting a flow between two consumers the version in zinc-plated steel holds 160 bar on both paths.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.