Adjustable T connector with cone, tube 28 L, stainless steel 1.4571, no nut or ring

Once installed, the adjustable T connector splits a line into two paths and joins the tube to a tube stud with a sealing cone and an O-ring. It is supplied with tube stud 28 L and tube connection 28 L (M36x2). The article is made of stainless steel 1.4571. The version is listed with light series and scope of delivery without nut and cutting ring.

Benefits

• The tee branches the line off without needing a second port on the device.
• The branch can be set to any direction before it is locked, so tube 28 L (M36x2) stays free of stress.
• Sealing cone with an O-ring at tube stud 28 L for a soft joint that can be undone repeatedly.
• Working pressure up to 160 bar in the light series.
• Temperature range -20 to +200 °C for the body in stainless steel 1.4571.

Applications

For a gauge take-off the tee is set into line 28 L (M36x2) while the main line stays continuous.

Standards and conformity

The stated temperature range -20 to +200 °C applies to the version in stainless steel 1.4571. An elastomer seal narrows it.