Adjustable T connector with cone, tube 18 L, stainless steel 1.4571, no nut or ring

The adjustable T connector splits a line into two paths and joins the tube to a tube stud with a sealing cone and an O-ring. In addition the sheet lists a temperature range of -20 to +200 °C. This version comes with tube stud 18 L and tube connection 18 L (M26x1.5). The version is listed with light series and scope of delivery without nut and cutting ring.

Benefits

• The tee branches the line off without needing a second port on the device.
• The branch can be set to any direction before it is locked, so tube 18 L (M26x1,5) stays free of stress.
• Sealing cone with an O-ring at tube stud 18 L for a soft joint that can be undone repeatedly.
• Working pressure up to 315 bar in the light series.
• Temperature range -20 to +200 °C for the body in stainless steel 1.4571.

Applications

At tube stud 18 L of a plant of the light series the branch sits where a further circuit is to be connected later.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.