Adjustable T connector with cone, tube 16 S, zinc-plated steel, no nut or ring

As a adjustable T connector the article splits a line into two paths and joins the tube to a tube stud with a sealing cone and an O-ring. The data sheet gives a working pressure of 400 bar. The stated figures are tube stud 16 S and tube connection 16 S (M24x1.5). Also stated are heavy series and scope of delivery without nut and cutting ring.

Benefits

• The tee branches the line off without needing a second port on the device.
• The branch can be set to any direction before it is locked, so tube 16 S (M24x1,5) stays free of stress.
• Sealing cone with an O-ring at tube stud 16 S for a soft joint that can be undone repeatedly.
• Working pressure up to 400 bar in the heavy series.
• Temperature range -35 to +100 °C for the body in zinc-plated steel.

Applications

For a gauge take-off the tee is set into line 16 S (M24x1,5) while the main line stays continuous.

Standards and conformity

The stated temperature range -35 to +100 °C applies to the version in zinc-plated steel. An elastomer seal narrows it.