Adjustable T connector with cone, tube 30 S, stainless steel 1.4571, no nut or ring

The adjustable T connector splits a line into two paths and joins the tube to a tube stud with a sealing cone and an O-ring. In addition the sheet lists a temperature range of -20 to +200 °C. This version comes with tube stud 30 S and tube connection 30 S (M42x2). The version is listed with heavy series and scope of delivery without nut and cutting ring.

Benefits

• The tee branches the line off without needing a second port on the device.
• The branch can be set to any direction before it is locked, so tube 30 S (M42x2) stays free of stress.
• Sealing cone with an O-ring at tube stud 30 S for a soft joint that can be undone repeatedly.
• Working pressure up to 400 bar in the heavy series.
• Temperature range -20 to +200 °C for the body in stainless steel 1.4571.

Technical data

Applications

For a gauge take-off the tee is set into line 30 S (M42x2) while the main line stays continuous.

Standards and conformity

The stated temperature range -20 to +200 °C applies to the version in stainless steel 1.4571. An elastomer seal narrows it.