Adjustable male stud elbow, G 1", tube 28 L, zinc-plated steel, no nut or ring

The adjustable male stud elbow leads a precision tube out of a parallel G thread at a right angle and holds it with a cutting ring. The data sheet gives a working pressure of 160 bar. The stated figures are male stud thread G 1" and tube connection 28 L (M36x2). This version is supplied with light series and scope of delivery without nut and cutting ring.

Benefits

• The elbow can be set and is then counter-locked, so tube 28 L (M36x2) stays free of stress.
• Parallel male stud thread G 1" with an elastomer seal, so the stud end seals without hemp or adhesive.
• Working pressure up to 160 bar in the light series.
• Temperature range -35 to +100 °C, limited by the elastomer seal at the body in zinc-plated steel.
• Tube connection 28 L (M36x2) through a cutting ring, held by both form and friction.

Applications

At a cylinder port with thread G 1" the elbow leads tube 28 L (M36x2) to the side at once and saves space.

Standards and conformity

The stated temperature range -35 to +100 °C applies to the version in zinc-plated steel. An elastomer seal narrows it.