Adjustable male stud elbow, G 1-1/4", tube 35 L, stainless steel 1.4571

In use, the adjustable male stud elbow leads a precision tube out of a parallel G thread at a right angle and holds it with a cutting ring. This version is listed with male stud thread G 1-1/4" and tube connection 35 L (M45x2). Its rating is a working pressure of 160 bar. In addition the data give light series.

Benefits

• The elbow can be set and is then counter-locked, so tube 35 L (M45x2) stays free of stress.
• Parallel male stud thread G 1-1/4" with an elastomer seal, so the stud end seals without hemp or adhesive.
• Working pressure up to 160 bar in the light series.
• Temperature range -20 to +200 °C, limited by the elastomer seal at the body in stainless steel 1.4571.
• Tube connection 35 L (M45x2) through a cutting ring, held by both form and friction.

Applications

For maintenance on a line of the light series only the union nut is undone and the stud thread stays in place.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.