Adjustable male stud elbow, G 1/2", tube 18 L, NC clamping ring 1.4571

The adjustable male stud elbow leads a precision tube out of a parallel G thread at a right angle and holds it with a cutting ring. In addition the sheet lists a temperature range of -20 to +200 °C. This version comes with male stud thread G 1/2" and tube connection 18 L (M26x1.5). The version is listed with light series and clamping system NC clamping ring.

Benefits

• The elbow can be set and is then counter-locked, so tube 18 L (M26x1,5) stays free of stress.
• Parallel male stud thread G 1/2" with an elastomer seal, so the stud end seals without hemp or adhesive.
• Working pressure up to 315 bar in the light series.
• Temperature range -20 to +200 °C, limited by the elastomer seal at the body in stainless steel 1.4571.
• Tube connection 18 L (M26x1,5) through a cutting ring, held by both form and friction.

Applications

For maintenance on a line of the light series only the union nut is undone and the stud thread stays in place.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.